تلخيص سبع خطوات عملية من البيولوجية المجهر قبل و بعد الاستخدام
A بيولوجي مجهر هو أ دقة بصري أداة إنه هو مستخدم إلى مراقبة بيولوجي شرائح٪ 2c بيولوجية خلايا٪ 2c بكتيريا و حية أنسجة ثقافة٪ 2c سائل ترسيب٪ 2c إلخ إنه يمكن أيضا مراقبة أخرى شفافة أو شفافة كائنات٪ 2c مساحيق ٪ 2c دقيقة جزيئات و أخرى كائنات. ال التالي هو أ سبع خطوات عملية من أجل ال إعادة الاستخدام من البيولوجية المجاهر تلخيص بواسطة ال المحرر ٪ 3 أ
٪ 0a1. مكان ال عينة إلى يكون لاحظ على المرحلة و المشبك it on the العلوي البطاقة.
٪ 0a2. تثبيت الهدف عدسة من كل التكبير على الهدف عدسة دوار وحدة٪ 2c و إدراج العدسة في ال العدسة أنبوب.
3. When operating, move the specimen to the middle of the stage, and first observe it with a low-magnification objective lens. Turn on the power switch and move the brightness adjustment knob to an appropriate position, turn the coarse adjustment handwheel to raise the stage until the shadow of the specimen can be seen, and turn the fine adjustment handwheel to obtain a clear object image. To choose the brightness, you can turn the handwheel of the condenser frame to raise or lower the condenser, and then adjust the variable diaphragm to change the aperture of the diaphragm so as to obtain the illumination brightness suitable for various detailed specimens. (According to the observation needs, there are color filters for use. The color filters are installed on the bracket at the lower part of the variable aperture, and the selected color can be obtained.) Turn the vertical handwheel on the stage to make the specimen move forward and backward; Turn the horizontal handwheel on the stage to move the specimen left and right. Move the object to be observed to the center for observation, and then turn to a high-magnification objective lens or an oil immersion objective lens for observation (when using an oil lens, cedar oil must be added to the specimen observation area). When switching and observing (the objective lens should not touch the sliced object), the image of the object can still be seen, and a clear object image can be achieved by turning the fine-tuning handwheel. After use, just turn the coarse adjustment handwheel to lower the workbench to the bottom, then move the brightness adjustment knob to the minimum brightness, and finally turn off the power switch.
٪ 0a4. ضبط ال السطوع الضبط زر إلى تغيير ال مضيئة سطوع من ال دوكسيدين رغوة إلى الحصول ال أفضل سطوع.
٪ 0a5. How to replace the light bulb٪3a unscrew the kharmled screw٪2c turn out the lamp holder plate٪2c pull out the light bulb٪2c and replace it with a new light bulb.
٪ 0a6. كيف إلى تثبيت و تفكيك ال ضوء جمع مرآة و ضبط ال ضوء مصدر٪3a متى استخدام اصطناعي ضوء مصدر٪2C محاذاة ال ضوء جمع مرآة مع ال المسمار تشغيل القاعدة٪2C الدوران ال ضوء جمع مرآة في اتجاه عقارب الساعة إلى النهاية إلى تشديد it٪2C ثم رفع ال المجهر قليلا٪2C فك فتح ال ضبط المسمار تحت القاعدة٪2C ضبط ال خيوط صورة إلى ال المركز من المجال عرض٪2C و ثم تشديد و ضبط المسمار إلى مراقبة تحت ال أفضل إضاءة.
٪ 0a7. بعد استخدام٪2c turn the coarse adjustment handwheel to lower the workbench to the bottom٪2c then move the bright adjustment knob to the الحد الأدنى السطوع٪2C و أخيرا تشغيل إيقاف الوكة الطاقة التبديل.
